Sloan's Woodshop - The Scroll Saw Store

Home

Plywood

Scroll Saw Blades

Band Saw Blades

Clock Inserts

Acrylic Sheets

Scroll Sanders & SS Files

Drum Sander

Pattern Books

Patterns

Drill Bits

Forstner Bits

Router Bits

Brush Sets

Miscellaneous

Needle Files & Riffler Sets

Web Specials

Ordering Info

Contact Us

Cutting a Notch in a Band Saw Fence for Curved Work

A band saw fence is excellent for straight ripping, resawing and repeatable square cuts, but it can become an obstacle when a workpiece needs to follow a curve. As the timber turns, its trailing edge may press against the fence. That pressure can force the blade off the layout line, increase friction and create a binding hazard.

Cutting a carefully positioned notch in an auxiliary fence gives the rear of the workpiece room to swing as the cut changes direction. The fence still supports the stock at the entry point, while the opening allows the timber to rotate rather than collide with a long, rigid face.

This modification is useful for Australian hobby workshops where space, timber selection and machine size vary widely. A compact benchtop saw in a Melbourne garage may need a different fence arrangement from a larger floor-standing machine in a Brisbane shed, so the notch should be designed around the saw, blade and workpiece rather than copied blindly.

The safest approach is to make a removable fence from stable sheet material, test it with scrap and treat the notch as a controlled clearance feature. It should never encourage hands to approach the blade or interfere with the blade guides, thrust bearings or dust extraction.

Why a notched fence helps with curves

A straight fence controls the workpiece along a continuous line. That is ideal when the timber travels parallel to the blade, but a curved cut requires the stock to rotate gradually. Once the back corner contacts the fence, the operator must either push harder or steer away from the intended line.

A notch removes the section of fence that causes this interference. The front portion can guide the workpiece into the cut, while the opening provides clearance for the rear portion as the timber follows an arc. This is especially useful for broad curves, templates and repeated shapes where a small amount of guidance improves consistency.

The opening does not make the saw self-feeding or eliminate the need for freehand control. The blade still follows the marked line, and the operator must turn the work smoothly without twisting the stock. For very tight curves, a narrower blade with suitable tooth spacing may be more important than the fence modification.

Choosing the fence material and notch shape

A replaceable auxiliary fence is preferable to cutting into the machine’s original fence. Straight, stable plywood around 18 mm thick is a practical choice, while quality laminated board or hardwood can work if it is flat and does not contain loose knots. Australian radiata pine plywood is widely available, although a denser sheet may resist wear better when used frequently.

The notch can be U-shaped, V-shaped or formed as a simple open-ended relief cut. A V-shaped opening gives gradual clearance and is easy to mark, while a rounded U-shape reduces sharp corners that can catch an edge. Keep the front guiding section long enough to support the stock before it reaches the curve, but avoid creating an unnecessarily deep cavity.

A useful starting point is an opening approximately 100 to 150 mm long, adjusted to the radius of the curves you expect to cut. The exact width depends on the thickness and shape of the workpieces. Make the opening generous enough that the stock cannot wedge against either side, while retaining enough fence face to guide the initial cut.

Marking and cutting the notch

Disconnect the saw from its 240-volt supply before removing or adjusting the fence. Measure the blade position with the fence installed, then mark the opening so the blade will run near its mouth rather than deep inside the notch. The blade must remain fully accessible for normal tracking and guide adjustment.

Cut the relief with a jigsaw, bandsaw or handsaw while the fence is removed from the machine. Round over or sand the edges, particularly the side closest to the operator. A smooth edge protects the workpiece and makes it easier to feel whether the stock is moving freely. Do not leave screws, staples or exposed plywood layers where they can catch the timber.

After refitting the fence, check that the notch does not touch the blade, lower wheel housing, blade guard or guide assembly. Move the fence through its adjustment range with the machine unplugged. If the opening is close to the blade, use a scrap board to simulate the workpiece and confirm that the intended rotation is possible without contact.

Setting up the saw for a curved cut

Fit a blade intended for curves rather than using a coarse resaw blade. A narrow blade can turn more tightly, while a finer tooth pitch produces a cleaner edge in thinner material. The general rule is to keep at least three teeth engaged in the stock during cutting, while allowing enough gullets to clear sawdust.

Set the upper blade guide just above the workpiece and adjust the side guides and thrust bearing according to the manufacturer’s instructions. Check blade tension, tracking and table squareness. A dull or poorly tensioned blade will wander regardless of how well the notched fence is made.

Before switching on, place the template or pencil line so the cut enters the notch smoothly. Feed at a steady rate and let the blade do the cutting. If the timber begins to bind, stop feeding, switch off the saw and wait for the blade to stop before backing the workpiece away. Never pull a trapped workpiece backwards while the blade is moving.

When comparing specifications for workshop consumables, the same careful habit used in this product comparison guide applies: check the actual size, material, intended use and manufacturer information instead of relying on a familiar product name.

A practical cutting sequence

Begin with a piece of scrap that matches the thickness and species of the project timber. Mark a broad curve and make a slow pass through the notched area. Watch whether the rear of the stock clears the opening and whether the front portion remains supported. If the workpiece catches, enlarge the notch only after disconnecting power and identifying the exact contact point.

For repeated parts, make a full-size template from MDF or plywood and attach it securely with double-sided tape or suitable clamps away from the blade path. A template riding against the fence can improve repeatability, but it must not be allowed to drag the workpiece sideways into the blade.

Keep both hands on the safe side of the cutting line. Feed with the hand nearest the fence positioned well behind the blade, and use a push stick, push block or purpose-made handle when the stock becomes small. Curved work often creates changing pinch points, so hand placement should be planned before the cut starts.

Checks before making the first project cut

  • Confirm that the fence is locked firmly and remains square to the table.
  • Check that the blade clears the notch throughout the fence adjustment range.
  • Make sure the blade is sharp, correctly tensioned and suited to the timber thickness.
  • Test the curve on scrap before cutting expensive jarrah, spotted gum or imported hardwood.
  • Verify that extraction hoses and electrical leads cannot catch on the workpiece.

Australian workshop considerations

Australian makers commonly work in sheds, garages and carports where dust, heat and humidity can affect timber movement. In Sydney and Brisbane, moisture changes may cause sheet goods or solid timber to move after the fence is made. Store the fence and project material in the same workshop for a reasonable period, and check flatness before use.

Metric measurements are the natural choice for Australian projects, so mark the notch in millimetres and record the blade width, fence thickness and intended curve radius. If ordering blades or accessories from overseas, confirm that dimensions, tooth specifications and shipping costs suit the machine rather than assuming an imperial equivalent will fit.

Electrical safety also deserves attention. Australian workshops use 240-volt power, and a portable saw should be connected through suitable protection, such as an RCD where appropriate. Follow the machine manual and the relevant state or territory Work Health and Safety requirements. Eye protection compliant with the applicable Australian and New Zealand standard, hearing protection and effective dust control are sensible baseline measures.

For product selection, Sloan's Woodshop provides access to bandsaw blades, sanding supplies, files and other woodworking accessories, with assistance available for choosing suitable items. Allow extra delivery time for regional areas and confirm United States shipping restrictions before placing an order, since the catalogue is operated from Tennessee.

Refining the fence for repeatable results

Once the trial cut works, label the fence with the blade size and the curve range for which the notch was designed. A fence intended for gentle furniture curves may be unsuitable for small scrolling shapes. Making two or three interchangeable auxiliary fences is often safer and more efficient than using one large opening for every job.

The notch should remain clean and free of accumulated dust. Packed sawdust can reduce clearance and make the opening appear larger or smaller than intended. Brush the fence after use, inspect the edges for damage and replace it if the material becomes loose, swollen or difficult to lock securely.

For a tight inside curve, drill a relief hole at the end of the pencil line before sawing whenever the design permits. This reduces stress at the corner and leaves a smoother transition. If the curve is too tight for the blade, use multiple relief cuts from the waste area rather than forcing the blade around the bend.

A notched fence is a simple aid, not a guarantee of accuracy. The quality of the result still depends on a suitable blade, stable stock, a clear layout line and controlled feeding. When those elements work together, the fence provides useful guidance without restricting the natural movement required for curved band saw work.

Maintaining safe control around the notch

Inspect the auxiliary fence before every session. Look for splits, loose fasteners, raised grain and signs that the notch has widened toward the blade. A damaged edge can catch a workpiece unexpectedly, while a loose fence can turn a controlled cut into a sudden kick or deflection.

Keep the workpiece flat on the table and avoid lifting it to change direction. Tilting can expose more blade, reduce support and cause the stock to twist. If a cut requires a sharp turn that cannot be made smoothly, stop and plan a different entry, relief cut or blade choice.

Dust extraction is particularly valuable when cutting plywood, MDF or dense Australian hardwoods. Fine dust can obscure the layout line and irritate the eyes and lungs. Use the machine’s guard and extraction connection correctly, and clean settled dust with a vacuum rather than compressed air that spreads it through the workshop.

With a removable fence, a correctly chosen blade and a deliberate feed rate, curved cuts become easier to control. The notch gives the workpiece room to turn while preserving support where it matters most, helping produce cleaner profiles and a more predictable cutting process.

Home Plywood Scroll Saw Blades Band Saw Blades Drill Bits Forstner Bits Router Bits Clocks Acrylic Sheets Pattern Books Misc

Drum Sander Kit Scroll Sanders & Files Brush Sets Needle File & Riffler Sets Web Specials Scroll Saw Patterns Contact Us Ordering

Order Toll Free:  1-888-615-9663

Sloan's Woodshop - 3453 Callis Road - Lebanon, TN 37090

We Do Not Ship Outside of the US